Payment & Shipping Terms:
|Grade Standard:||Industrial Grade||Appearance:||White Powder|
general aluminum tripolyphosphate,
oil paint aluminum tripolyphosphate,
water paint aluminium tripolyphosphate
High-Performance Anticorrosive Coating Base Material Water And Oil Paint General Aluminum Tripolyphosphate
Aluminum tripolyphosphate has three main characteristics, one is non-toxic, and the other is strong rust resistance.
The third is strong covering power. The water-based aluminum tripolyphosphate product has no harmful metals such as chromium and lead, which solves the problem of incompatibility between the original emulsion and anti-rust pigments. A special production process is adopted to form a protective film on the surface of the coated object. In addition, it also has a super hiding power, which can replace part of the titanium dioxide in the coating. Of course, this also reduces its production cost. The product performance is stable, which ensures the use effect of the anti-rust pigment on the coated object. Water-based, the three characteristics of water-based aluminum tripolyphosphate keep the coated object bright and bright forever. The above are the three characteristics of water-based aluminum tripolyphosphate.
The pigment is widely used in various primers and bottom-coatings, and has good affinity with varnishes. It can be used in conjunction with various pigments and fillers, and can also be used in combination with various anti-rust pigments. It can be used to prepare various high-performance anti-corrosion pigments. Corrosive paint. Suitable for solvent-based coatings such as phenolic resin, alkyd resin, epoxy resin, epoxy polyester and acrylic resin, as well as various water-soluble resin coatings (such as: highly adaptable water-based epoxy ester dip coating, etc.); it can also be applied With high build paint, powder paint, organic titanium anti-corrosion paint, rust paint and bitumen varnish, zinc-rich primer, fire-resistant paint, heat-resistant paint, etc.
3. Aluminum tripolyphosphate Quality standard:
|Residue on sieve%(325mesh)||≤0.5|
Contact Person: Yara