 |
|
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| USGAE: | FILLING MATERIAL | APPLICATION: | BINDER |
|---|---|---|---|
| USGARE: | HIGH TEMPERIAL RESISTANCE | ||
| High Light: | aluminium dihydrogen phosphate,aluminium tripolyphosphate |
||
40-45 P2O5 Aluminum Dihydrogen Phosphate Liquid Or White Powder BINDER COLORLESS
CAS: 13939-25-8
Molecular Formula:AIH2P3O10·2H2O
a.It can be used together with various coloring pigments, filling agents and antirust pigments in the production of high performance anti-corrosion coating materials.
b.it is applicable to the production of dissolvent type of coating materials such as formaldehyde phenol resin, alkide resin, epoxy resin, epoxy polyester and acrylic resin as well as water-soluble resin coating materials such as highly adaptable water-soluble epoxy ester dipping paint.
c.it is also applicable to the preparation of high build paint, powder coating, organic titanium-contained anticorrosion coating, on-rust paint, bituminous paint, zinc-rich primer, fire-retardant coating, heat-resistant paint, etc.
Aluminum DihydrogenTripolyphosphate examination report:
Aluminum Dihydrogen Phosphate (Liquid)
Product type: high temperature materials,binder
Product appreance: colorless sticky liquid
Chemical class al(h2po4)3
Cas no．13530-50-2.
Product application:it is mainly used as binder and curing agent in the production of hi-temp refractory materials for kiln, spray paint, fire clay, casting and foundry industry.it is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature.
Technical data
| Test items | Technical parameters |
| Appearance | Colorlesssticky liquid |
| The ph value | 1.5-2.5 |
| Density | 1.47min |
| P2o5 % |
Total content 37-43% |
| Al2o3 % |
Standard packaging 30kg/drum
Transport and storage
Protect against weathering. Store in a dry place and avoid extreme fluctuations in
Temperature. Special conditions for opened packaging: close bags after use to prevent
The absorption of moisture and contamination
Safety
The product is not classified as dangerous under the relevant ec directives and
Corresponding national regulations valid in the individual eu member states. It is not
Dangerous according to transport regulations. In countries outside the eu, compliance
With the respective national legislation concerning the classification, packaging, labeling
And transport of dangerous substances must be ensured.
The information contained in the safety data sheet should be observed.
This contains information on handing, product safety and ecology.
| Check Item | Standard | Sampling Value |
| Whiteness% | ≥90 | 92.5 |
| P2O5 % | 60-70 | 62.5 |
| Al2O3 % | 20-30 | 24 |
| Oil absorption g/100g % | 25-35 | 30 |
| The PH Value | 3-5 | 4.5 |
| Moisture % | ≤1.5 | 1 |
| Residue on sieve(45um)% | ≤0.5 | 0.4 |
| packing | 25kg each bag . | |
Contact Person: Daisy
Tel: +8615833937290
